Email
Password
Learn more!
Bio
My name is Mark Adcock. I have been in the Home building and remodeling industry for 30 years. I have done everything from framing to Finish Carpentry including;
Building custom Cabinets and Countertops, Trim and Molding, Painting, Finishing, Drywall, Kitchen and Bath remodeling, Door and Window replacement, Concrete and Flatwork, Tile work, carpet ...
I would like to be considered for the work you are requesting.
When most people are looking for a handyman, not only do they want someone that has the skills to do the work, but someone that shows up on time and with all the tools to do the work. You do not want someone stuck for hours because they need a specific tool or specific screws and fasteners.
Let me tell you what I bring when I come to you job.
F-250 3/4 ton Ford Truck
16 ft. Cargo trailer loaded with tools and materials.
I carry almost every tool imaginable in 110v and Battery power. I’ll list just a few:
6 Drills of different sizes, with bits
5 Power saws
3 Reciprocating Saws
2 Power Planers
7 Nail Guns and Staplers from a pin nailer to 3-1/4 Frame nailer
Wet / Dry Vacuum
Table saw
Compressor
Ladders, Platforms and Safety equipment
I also carry many sizes of nails and Screws and some sundries: Drop clothes, tape, trash bags. I will not have to go to the hardware store every time I need a fastener. After hearing about your job I will stock the parts that I think will be needed, In some cases I will have to start the job to get a full understanding an list of parts needed.
Lastly, I do not drink or smoke and will always clean up when finished.
$25 per hour for a minimum of 2 hours, $20.00 per hour for 17 hours or more (2 days)
$15 trip charge for less than 4 hours
Plus material cost

Profile Summary:
Remodeling and Repair Pompano Beach, FL
Trim Trim and Wood Finish Work Pompano Beach, FL
Painting and Finish Pompano Beach, FL
My Skills

Remodeling and Repair

Category: Skilled Trade / Crafts
Description
Let me tell you what I bring when I come to you job.
F-250 3/4 ton Ford Truck
16 ft. Cargo trailer loaded with tools and materials.
I carry almost every tool imaginable in 110v and Battery power. I’ll list just a few:
6 Drills of different sizes, with bits
5 Power saws
3 Reciprocating Saws
2 Power Planers
7 Nail Guns and Staplers from a pin nailer to 3-1/4 Frame nailer
Wet / Dry Vacuum
Table saw
Compressor
Ladders, Platforms and Safety equipment
I also carry many sizes of nails and Screws and some sundries: Drop clothes, tape, trash bags. I will not have to go to the hardware store every time I need a fastener. After hearing about your job I will stock the parts that I think will be needed, In some cases I will have to start the job to get a full understanding an list of parts needed.
Lastly, I do not drink or smoke and will always clean up when finished.
$25 per hour for a minimum of 2 hours, $20.00 per hour for 17 hours or more (2 days)
$15 trip charge for less than 4 hours
Plus material cost
Relevant Education / Credentials
Years Experience: 30

Trim Trim and Wood Finish Work

Category: Skilled Trade / Crafts
Description
Let me tell you what I bring when I come to you job.
F-250 3/4 ton Ford Truck
16 ft. Cargo trailer loaded with tools and materials.
I carry almost every tool imaginable in 110v and Battery power. I’ll list just a few:
6 Drills of different sizes, with bits
5 Power saws
3 Reciprocating Saws
2 Power Planers
7 Nail Guns and Staplers from a pin nailer to 3-1/4 Frame nailer
Wet / Dry Vacuum
Table saw
Compressor
Ladders, Platforms and Safety equipment
I also carry many sizes of nails and Screws and some sundries: Drop clothes, tape, trash bags. I will not have to go to the hardware store every time I need a fastener. After hearing about your job I will stock the parts that I think will be needed, In some cases I will have to start the job to get a full understanding an list of parts needed.
Lastly, I do not drink or smoke and will always clean up when finished.
$25 per hour for a minimum of 2 hours, $20.00 per hour for 17 hours or more (2 days)
$15 trip charge for less than 4 hours
Plus material cost
Relevant Education / Credentials
Years Experience: 30

Painting and Finish

Category: Skilled Trade / Crafts
Description
Let me tell you what I bring when I come to you job.
F-250 3/4 ton Ford Truck
16 ft. Cargo trailer loaded with tools and materials.
I carry almost every tool imaginable in 110v and Battery power. I’ll list just a few:
6 Drills of different sizes, with bits
5 Power saws
3 Reciprocating Saws
2 Power Planers
7 Nail Guns and Staplers from a pin nailer to 3-1/4 Frame nailer
Wet / Dry Vacuum
Table saw
Compressor
Ladders, Platforms and Safety equipment
I also carry many sizes of nails and Screws and some sundries: Drop clothes, tape, trash bags. I will not have to go to the hardware store every time I need a fastener. After hearing about your job I will stock the parts that I think will be needed, In some cases I will have to start the job to get a full understanding an list of parts needed.
Lastly, I do not drink or smoke and will always clean up when finished.
$25 per hour for a minimum of 2 hours, $20.00 per hour for 17 hours or more (2 days)
$15 trip charge for less than 4 hours
Plus material cost
Relevant Education / Credentials
Years Experience: 30